Not real sure if this will help, but Ten mile away may have a loss in the delay of the audio to the repeater .The distance may causes a bit of a fuzz sound .
In [email protected], [EMAIL PROTECTED] wrote: > Hi all > I've been watching the threads on audio reproduction. I would like to go > back to the orginal question that started all this, what is the best way to > improve the audio being reproduced in a Micor repeater? > My repeater system is somewhat different than most, I am running a complet > Motorola Micor system split site six meter repeater. The receiver site repeats > the signal on a Micor 440 link transmitter to the Micor six meter > transmitter site ten miles away. The orginal Micor station cards are used at each site > no controller interface. If you were to listen to the audio from the > transmitters at each site they sound okay. However the audio out at the six meter > transmitter after passing through the complete system needs some enhancement. > Thanks for any idears or comments in advance > Mike Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
