As I suggested in an earlier e-mail, depends on the frequencies you are using for your repeaters.
Neil > Kevin Custer wrote: > > Hi, > > If this if for amateur use, there is a much easier way. > > You can use one simplex intermittent duty radio at one end connected > to the link port of a controller at that site. Nothing needs > installed at the other site . Remote base linking is popular and > economical. For the hop suggested, an Icom IC-4AT running a 200 mW > on a rubber duck would be fine. > > I suggest the reading of this: > http://www.repeater-builder.com/rbtip/repeaterlinking.html > > Kevin > > Virden Clark Beckman wrote: > > > 2 continuos duty uhf radios, 2 feedline runs, 2 beam style antennas, > > 2 > > power supplies, I think I would try setting the output power at 5-7 > > watts first and a open radio port on each end that can be configured > > to > > operate as you would desire, probably 2 ctcss detectors so either > > one > > knows when the sister has a user and when it is ok to use the > > system. > > > > Rich wrote: > > > > > >> What radio equipment do I need to connect two 25 Watt UHF > >> repeaters > >> together, at a distance of 10 miles mountain top to mountain top. > >> > >> > >> > > > > > > --------------------------------------------------------------- > Yahoo! Groups Links > > * To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > * To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
