OK, thanks Skipp.  I'll look there for the manual numbers.  Ours was not a
special build, but rather one for 460 MHz that was tuned down.

What I currently have is a 3" binder that contains a number of different
sections, including receiver; transmitter; then special options, etc.  My
manual has the transmitter info for both VHF and UHF, but only contains the
page sheets for the VHF receiver.  Oh well...

Thanks again!

73 de Mark - N9WYS

-----Original Message-----
From: skipp025 [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 20, 2004 11:46 AM
To: [email protected]
Subject: [Repeater-Builder] MSR2000 Manuals

Hi Mark,

There are three basic manuals for the MSR Series of
repeater/base stations.  First is the control and
operation manual, which has the back-plane board
and control module information.

The VHF Manual has a green strip on the cover and
contains the Transmitter/Receiver information. The
power supply information is also in the VHF Manual.

The UHF Manual has a blue strip on the cover and
has the RF information for the UHF strips and the
internal duplexer.

I have at least two other non standard MSR Manuals,
which are from as-built projects.

What I call Canadian MSR's are lower rf power out
and contain a consolette base type power supply,
vs the power hungry high power US dc supplies.

Part numbers are probably on the repeater builder
web site. The special as-built manuals are probably
not available.

cheers
skipp

www.radiowrench.com

> "Mark Tomany" <[EMAIL PROTECTED]> wrote:
> Skipp - can you advise the part numbers for the
> manual sections for the UHF receiver?  My manual
> has the transmitter stuff, but the receiver stuff is
> all for the VHF unit.  I'm going to try to get
> them from Motorola...  If I'm not successful, do
> you - or anyone else here - have the UHF receiver
> manual sections available for copy?
>
> Of course, I'll reimburse for any copying fees
> and postage....
>
> Thanks,
> Mark - N9WYS






Yahoo! Groups Links









 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
     [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


Reply via email to