At 05:59 PM 5/25/04 +0000, you wrote: >A while back, the conversation was about bench sensitivity versus >real world sensitivity. I would like to test the sensitivity of our >repeater rx while hooked up to the duplexer, feedline and antenna. > >I think I need some kind of T connector to put between the duplexer >and receiver. I don't think it would be a standard T, so my question >is what exactly do I need? > >Thanks
You modify the T by unscrewing the center pin, cut it or grind it down so that there is an air gap between the pin and the mating connector, then reinstall it. Mine ended up with a 3/16 air gap and works fine. It's all here: <http://www.repeater-builder.com/rbtip/effectivesens.html> Mike WA6ILQ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
