At 08:08 PM 6/2/04 -0400, "Thomas Staley Jr." <[EMAIL PROTECTED]> wrote:
>What do you think of the RLC-MOT vs getting a used Micor audio card?
You can do that - all you need is raw discriminator audio, two 25k pots,
and +9.6 volts DC. If you need a PL decode line you need to add a
PL decoder board - it plugs into the audio-squelch card. Note that
there are two different PL decode boards - if I remember correctly
there are 5-pin and 7-pin cards.
The Micor audio PA is not needed in a repeater environment. If
you want a local speaker amp just use an LM386. It also consumes
a lot less DC current.
Mike WA6ILQ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
