The slugs can be feed with MEK. However, you cannot get the high/high-high
split filter to tune to 146 MHz. The coils have to be changes as well as
the capacitors. I have converted some with little problem. After
conversion, the filter should be tuned with a sweep generator to get the
filter somewhat flat over the frequencies that you want to use the radio.
The filter in a mobile usually does not have epoxy filling the coil form.
73
Glenn
WB4UIV
At 09:41 PM 06/03/04, you wrote:
>I have a micor base/repeater station and the second bpf the one attached to
>the tripler needs to be tuned problem is that the tuning screws are epoxied
>in and I can't clean them up so I need a new one but don't know where to get
>one can someone help me out???
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
