> Have you ever measured the short squelch tail length
> of your circuit? I
> think the Micor squelch is around 2-3 milliseconds,
> while the Mastr
> II/modified MVP short squelch measures around 6
> milliseconds.
>
> I believe the SQ-1000 is spec'd for 20 milliseconds
> release time with a
> full quieting signal, which is too long IMO (I can
> hear a noise burst of
> that length, as opposed to the elegant "click" sound
> of the short Micor or
> Mastr II squelch).
>
> Bob NO6B
>
I have not measured it, but I would guess it to be
less than 5, probably around 3, sounds virtually
identical to the Micor original. I think the long part
is about 150-200.
20 does sound too long, that would let some detectable
noise actually come through. That is about what the
newer Kenwood repeaters have- very short, but
detectable.
Joe
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
