I have seen where elements are sent out for re-crystalling (different freq) and come back with a stick-on label showing the new freq. Maybe the labels came off, revealing a freq that is no longer in the element? (I've actually had this happen to me before.)
Mark - N9WYS -----Original Message----- From: Neil McKie [mailto:[EMAIL PROTECTED] Sent: Friday, June 11, 2004 2:30 PM To: [email protected] Subject: Re: [Repeater-Builder] Micor 4 Channel Help Needed Perhaps ... 1) the Channel Elements are on a frequency that the radio is not tuned to or ... 2) there are no crystals in those Channel Elements ... 3) the ground return for the Channel Elements selector switch in the control head is not connected to ground - anywhere. Neil Mathew Quaife wrote: > > Yes, they are in the 163 Mhz range. When I press the mic button > the radio keys up, just no power output. > > Mathew > > ----- Original Message ----- > From: "Neil McKie" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Friday, June 11, 2004 10:44 AM > Subject: Re: [Repeater-Builder] Micor 4 Channel Help Needed > > > > > Are there any Channel Elements in it? > > > > Neil > > > > w9mwq wrote: > > > > > > I just got a 4 channel micor radio, T73RTN3180B radio, actually two > > > radio's and one set on control heads. The radio comes on, has good > > > volume, and squelch works, but there is no receiver sensitivity, nor > > > power ouput. Both radios do the exact same thing. I'm thinking > > > control head, but everything seems to be hooked up. > > > > > > Mathew Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
