I've read the description on the repeater builder website of the astron
issues and circuits, but not sure if that will solve what I'm currently
experiencing.
I've got a 50 amp rack mount supply, the problem with them is that if
there is much of a load or draw on them when you DO restore AC power,
they go into this protect mode. I've got a couple small radios on them,
but when power comes on there is an immediate current draw and that
seems to lock the power supply down. The only way I have found to get
it back is to turn it off, disconnect the load, plug it in, then hook
the load back up.
Is it all the same issue and will the overvotage circuit solve that as
well?
Thanks in advance,
Daron J. Wilson, RCDD ) )
Telecom Manager ( (
LH Morris Electric, Inc. ) )
(541) 265-8067 office _|****| mmm!
(541) 265-7652 fax ( | | coffee!
(541) 270-5886 cellular \| |
[EMAIL PROTECTED] |____|
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
