could you send some info so we know if the board you have will work with the power supply I have. It is a 50 amp unit rack mount and it got to the point it was turning itself a number of time a day even with a UPS on the ac going in to it. The repeater was using about 27 amps in TX as shown by the meters on the power supply. It is an older ver.
thanks John ----- Original Message ----- From: "Kevin Custer" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, July 15, 2004 7:17 PM Subject: Re: [Repeater-Builder] Re: Astron Over Voltage or Crowbar issues > I'm interested, and would prefer you to post to the list. > > Kevin Custer > > skipp025 wrote: > > >Although I don't normally list it for sale. > >I do mfgr a much improved astron regulator > >board that "drops in place" of an exisiting > >board. A much improved circuit, which > >addresses all the known problems, ie RFI, > >Overshoot, Regulation, the dreaded crowbar > >circuit.... I have an option for variable > >front panel adjustable voltage regulation. > > > >They are pricey at near $50 each, but well > >worth a retrofit into the 50 and 30 amp > >supplies. It's a true Astron revision, > >much better than the original board... > >supplied with your supply. > > > >Many early Astron supply regulator boards are > >problematic. > > > >Constact me direct if you're interested. > > > >cheers > >skipp > >www.radiowrench.com > >skipp025 at yahoo.com > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
