I need a little advise here. I want to test my repeater's
sensitivity through the duplexer's while the transmitter is keyed
up, into my Cushman Service Monitor. What is the best method of
doing this? Do I need an isolator of some sort, or will the service
monitor handle both the incoming power and the outgoing signal
generator? It's a Cushman 6030 by the way. The repeater is working
excellent for the most part. The problem that I am having is on
weak signals, the audio is being chopped out, almost like the PL
deck is shutting down. On the bench, the receiver is at about .25
microvolts sensitivity at 12 DB Sinad. Audio out of the transmitter
is about 4KHz wide, and clean at 100 watts. Any suggestions.
Handhelds are able to get in from about 4 miles away, mobiles have
no troubles at 30 miles away. The antenna is only up at 60' right
now, fed with 120' of 7/8" Andrews hardline. But it seems the
handhelds are the one's having the problems, and their signal is not
really that bad. Help please.
Mathew
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
