Will give that a try tomorrow and see if it is the same and take it from there. I'm almost betting it is the Handhelds with the elevated pl tone output. Going to have to give another stab at making an iso tee to work with. Thanks for the input. Will let you know how it comes out.
Mathew > You want the user to be a bit noisy when you do that test. If you then turn > your repeater TX on and nothing changes, you don't have desense. > > Chuck > WB2EDV > > > > ----- Original Message ----- > From: "Mathew Quaife" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, July 26, 2004 10:48 PM > Subject: Re: [Repeater-Builder] Receiver Sensitivity Testing Through > Duplexer > > > > That I can do, I have another antenna that is up that I can hook to the > SM. > > From what I can tell I am not getting any desence, as I did have one > > operator about 25 miles away, listening through the receiver ouput, I > could > > here him just fine and that was with the repeat mode turned off. He would > > talk, and I would key up the transmitter, nothing would change. I'm > leading > > it back to the PL area, as was mentioned, I think it is killing the PL as > > they talk. I just want to make sure the duplexer is tuned up properly and > > all is working there. If its the PL, and is coming from the handie > talkie, > > not much I can do there. > > > > > > > Mathew, > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
