Hi guys I may have some "M" analogue bag phone 2 wire 600 ohm interfaces if
you are interested.
Cheers
Brett

----- Original Message ----- 
From: "Mark Holman" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, July 29, 2004 11:24 AM
Subject: Re: [Repeater-Builder] Bag Cell Phone rant?


> If you put a Cell Roof Mount antenna on the metal building that will be
> sheilded from the repeater, as well improve reception, or get a Beam
antenna
> and point it towards the cell site.
>
> Using Good Eng. Pratices is the key.
>
> Mark A. Holman, CRO, AB8RU
> [EMAIL PROTECTED]
>
> ----- Original Message ----- 
> From: "John Clark" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Monday, July 26, 2004 12:30 PM
> Subject: Re: [Repeater-Builder] Bag Cell Phone rant?
>
>
> > You are sadly right, and on that day I will depend entirely on mobile
> 2-way radio for communications.
> > I'd rather hear a bit of static any day as opposed to bits of garbled
> digital mess.
> > It's frustrating to me that cell phones with ring tones, cameras and
games
> are better sellers than quality audio.
> >
> > They say the old brick phones (like mine) cause cancer. I say the tiny
> digital phones cause stress!
> > The carriers in my area already look at the analogue channels as
> secondary, unimportant lines.
> >
> > John Clark - KI4AWK
> > Thomasville, GA
> > [EMAIL PROTECTED]
> >
> > > FYI-in a couple of years, carriers will no longer be required to
> > > maintain analog channels, so you can bet that the analog channels will
> > > go away quite quickly, and the bag phone will no longer work.
> > >
> > > -- 
> > > Jim Barbour
> > > WD8CHL
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to