Who made the MASTR Eleven and what years? :-) (-;
--- In [email protected], "John J. Riddell"
<[EMAIL PROTECTED]> wrote:
> We had a similar problem here about 20 years ago on VE3RSO....a
fully
> commercial set-up
> Mastr 11 repeater and as I recall it was a 555 timer that needed
a .01 Mfd
> bypass installed on one of the
> leads....I'll try to dig thru my notes to see if it was documented.
> It's on one of the boards in the control shelf.
>
> John VE3AMZ
>
>
> ----- Original Message -----
> From: "derek_mcintyre" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Thursday, July 29, 2004 9:54 PM
> Subject: [Repeater-Builder] GE Mastr II/IDA Controller - Selective
COR?
>
>
> | I am using a full blown GE Mastr II repeater station with an IDA
> | control board (I suppose this is a factory installation). It
has a
> | speaker on the front, with a volume control and a few selector
> | switches, and jumpers on the board which select time out, hang
time,
> | etc. I have a CW identifier interfaced as well.
> |
> | I am not using any additional controller with this station and am
> | having a strange problem. Quite often, the repeater seems
to "drop"
> | users. It's not a time-out timer problem. Users will be
talking.
> | One will un-key, and the next one will pick it up, but the
repeater
> | will NOT repeat! When he finally unkeys, the next user will
pick it
> | up and it will work just fine. It's not one user in particular.
> | There is no time frame associated with it. It's like the unit
has
> | selective COS. It drops whoever it wants to.
> |
> | Is there anything that you can think of that would make this
happen?
> | I have changed hang times all over the place, even took the time
out
> | timer to 10 minute mode. In the manual there is a "master"
timer but
> | I don't think this is a timing issue. If I can't get this
> | straightened out, I'll probably wind up having to put an external
> | controller on the thing. Any suggestions?
> |
> | Thanks
> | KC4FWC
> |
> |
> |
> |
> |
> |
> |
> | Yahoo! Groups Links
> |
> |
> |
> |
> |
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
