Thanks much for the info. Just the type of answer I was searching
for. I'll try that this weekend. Thanks again,
KC4FWC
> Regarding the time out problem in the GE Mastr II, check the
repeater
> control board, 19D417385 G2
> and add a .01 capacitor from pin 5 of U-1 and U-2 (555 timers) to
ground.
> These were ommitted by GE
> for some reason, and if missing can make these timers unstable.
>
> Quoting the Sams 555 timer applications sourcebook, Page 18:
>
> "If the control pin (Pin 5) is not used, it is recommended
> that it be bypassed to ground with a .01 mfd capacitor to prevent
any noise
> from altering the calculated pulse width"
>
> 73 John VE3AMZ Waterloo, Ontario.
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
