I am helping a friend put together a split site 2-meter repeater. We
are using a UHF Micor receiver for one end of the link, tuned to
446.500MHz. I have tuned it per the alignment instructions in the
manual, and evrything tunes and resonates as it should, but the
sensitivity is only about 1.5uv. The injection string has good meter
readings. Anyone have any ideas? Thanks and 73,
Kevin, K9HX
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
