Kevin,
Did the RX have rated sensitivity on the original operating frequency?
If not, Q104 may be bad.
If so, try replacing C138 with a 4.7pf.
John
At 08:44 AM 7/31/04, you wrote:
>I am helping a friend put together a split site 2-meter repeater. We
>are using a UHF Micor receiver for one end of the link, tuned to
>446.500MHz. I have tuned it per the alignment instructions in the
>manual, and evrything tunes and resonates as it should, but the
>sensitivity is only about 1.5uv. The injection string has good meter
>readings. Anyone have any ideas? Thanks and 73,
>
>Kevin, K9HX
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
