--- In Repeater-Builder@yahoogroups.com, "texaswpd103" <[EMAIL PROTECTED]>
wrote:
> I picked up a good used Mot R100 repeater I am going to take to my
local Motorola shop to have programmed
Ryan, I'll bet the "motorola shop" does not even know how to work on
the R100, letalone program it.
If the R100 IS PL, then it can only do PL. DPL requires a different
microprocessor and a lot of parts changes. They will go to 440 and to
474 with some alignment. They are NOT broadband.
Being that the German Maxtrac, alias R100, are up near 14 to 18 years
old you may need to replace a few caps, the two big ones in the power
supply, and a few on the big logic board.
There are a few improvement mods we have made to the R100's over the
years.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
