John, OK, found my book. You have 5 seconds to enter the programming code which is "35687". The panel is disabled. To exit the programming mode press "Reset"
If you need more than that I could fax the book or have it copied and mail it to you, my scanner is out of service right now. There is just to much to type in otherwise. Paul -----Original Message----- From: Neil McKie [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 08, 2004 10:18 AM To: [email protected] Subject: Re: [Repeater-Builder] Re: Midland Community Tone Panel Could it be Connect Systems Inc.? http://www.connectsystems.com Could it be Communications Specialists Inc.? http://www.com-spec.com Hope this helps, Neil John wrote: > > Neil, > Yes, I did. No response. Communications Systems Inc. that I found > on the net is a different company now. I was hoping that someone > here might have had some experience with this tone panel. We tried > the programming instructions for the CSI-32 and they didn't work. > Same style,but, different pc board layout. > Thanks, I guess I'll just keep looking. > > 73's > John > > --- In [email protected], Neil McKie <[EMAIL PROTECTED]> > wrote: > > > > Did you try contacting CSI? > > > > Neil > > > > John wrote: > > > > > > I am looking for a programming manual for this tone panel. The > front > > > panel controls resemble the CSI-32(led's, number pad, power switch > > > and reset switch. It has a 15 pin serial connector on the back, > some > > > adjustments for audio, tone, ect. It has NO phone jack and a power > > > connector that has main power, ground and aux. power, ground.) > But, > > > the PCB is different. There are no model numbers or other > > > identification. This was made by Communication Systems Inc. circa > > > 1987. Any help would be greatly appreciated. > > > Thank you > > > > > > John > > > KE7AYV > > > Sheridan, WY > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
