John, That is the access code for the CSI-32.
Paul -----Original Message----- From: John [mailto:[EMAIL PROTECTED] Sent: Thursday, September 09, 2004 12:00 AM To: [email protected] Subject: [Repeater-Builder] Re: Midland Community Tone Panel Thanks Paul, Is that the instructions for the CSI-32 or for the Midland? The access code is the same for the CSI-32. We tried that one, but, maybe we didn't do it fast enough. Will try again. I'll let you know on the copy. We'll try the program code and see what happens. Thanks again John --- In [email protected], "Paul Finch" <[EMAIL PROTECTED]> wrote: > John, > > OK, found my book. You have 5 seconds to enter the programming code which > is "35687". The panel is disabled. To exit the programming mode press > "Reset" > > If you need more than that I could fax the book or have it copied and mail > it to you, my scanner is out of service right now. There is just to much to > type in otherwise. > > Paul Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
