Hi Kevin,
>I downloaded the file from the location listed and checked the diagram out.
>I have a question regarding the bottom of the 2 pictures.
>
>1. If the level of either input is changed, will this alter the level of the
>other input?
>
No.
>2. Can one add extra inputs to the circuit, I want to use an circuit that
>will allow 4-6 inputs with 2 outputs.
>
Yes.
>3. I would like to look at using a IC switch on the above 6 inputs, that
>allow the inputs to be switched when required? Believe the IC would be a
>4040, but I would have to double check. I know some repeater controllers use
>this chip to control the audio paths.
>
I'd use a 4053.
Kevin
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
