Thanks Jim. Great explanation. -Tim
-----Original Message----- From: Jim B. [mailto:[EMAIL PROTECTED] Leave the tone turned off first. If you have any way to put a local mic on the tx, or generate audio DIRECTLY into the mic input, set the deviation on the transmitter for maximum deviation, usually +/-5Khz (For ham rptrs, I set it up to abt 5.5 to keep folks from going into limiting normally. Ideally, a normal user with reasonable audio should not go into limiting very often.) Then go back and generate 1Khz @ +/-3Khz deviation, and set the repeat level for "3 in, 3 out.". It helps at this point to do a audio sweep and plot in/out deviation across the audio spectrum. Then, with no other mod, set the PL for +/-600-800 hz. -- Jim Barbour WD8CHL Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
