Aren't those the white Molex style connectors like what is connecting the CTCSS board in the Mastr II? Different number of connections but the same design, right? I got some of those from my local Industrial electronics house several years ago. I will have to look to make sure or someone else can confirm.
Paul -----Original Message----- From: Q [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 29, 2004 9:48 PM To: [email protected] Subject: Re: [Repeater-Builder] Mastr II edge connectors I get 'em from old backplanes that are bad,havent seen any elsewhere. ----- Original Message ----- From: Chuck Kelsey <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, September 29, 2004 9:02 PM Subject: [Repeater-Builder] Mastr II edge connectors > > Since we're talking about plug in cards for the Mastr II station, where does > one acquire the edge connectors that will mate with the cards? GE used dual > 7-position connectors (2 or 3 depending on the card). However, Digi-Key > doesn't list anything with the right connector count (no 7-position, no 17 > position, no 38 position). > > Any ideas? > > Chuck > WB2EDV > > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
