I did a search on the Digi Key web site and came up with no manufacturers having the correct pin counts. Did you go and look and find something else that I missed?
Chuck WB2EDV ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, September 29, 2004 11:00 PM Subject: Re: [Repeater-Builder] Mastr II edge connectors > Try "AMP" connectors, they seem to have any connectors > I've looked for in the past. > > Regards, Barry > --- Q <[EMAIL PROTECTED]> wrote: > > > > > I get 'em from old backplanes that are bad,havent > > seen any elsewhere. > > > > ----- Original Message ----- > > From: Chuck Kelsey <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Wednesday, September 29, 2004 9:02 PM > > Subject: [Repeater-Builder] Mastr II edge connectors > > > > > > > > > > Since we're talking about plug in cards for the > > Mastr II station, where > > does > > > one acquire the edge connectors that will mate > > with the cards? GE used > > dual > > > 7-position connectors (2 or 3 depending on the > > card). However, Digi-Key > > > doesn't list anything with the right connector > > count (no 7-position, no 17 > > > position, no 38 position). > > > > > > Any ideas? > > > > > > Chuck > > > WB2EDV > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > _______________________________ > Do you Yahoo!? > Declare Yourself - Register online to vote today! > http://vote.yahoo.com > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
