rtoplus wrote: >Decision making time on my part. Background...I have 2 micor UHF >repeaters, 1 is a stock community repeater flavor the other is a >standard unit. The triplers are bad in both units. After much >searching for tripler replacements and by virtue of me being tired >of having these 2 full size cabinets sitting uselessly in my office, >I gotta do something. I was thinking as an option being to use an >exciter board from Hamtronics...the crystal controlled one with the >oven for part 90 compliance as a replacement for the stock micor >exciter/tripler/low level amp. The receivers work fine in both of >my units as do the power amps (100W). I do have a bad power supply >in one unit tho (bad 9.5 voltage under a load) that will have to be >replaced. These units will be used for GMRS usage so type >acceptance is a must! > >Any thoughts or other recommendations? >
Fix the triplers.... http://www.repeater-builder.com/rbtip/micoruhftripler.html Kevin Custer Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
