What about using a Maxtrac LPIxxx series rafio? It has a 2W output.
Steve WA6ZFT
On Monday 15 November 2004 05:20, rtoplus wrote:
> Decision making time on my part. Background...I have 2 micor UHF
> repeaters, 1 is a stock community repeater flavor the other is a
> standard unit. The triplers are bad in both units. After much
> searching for tripler replacements and by virtue of me being tired
> of having these 2 full size cabinets sitting uselessly in my office,
> I gotta do something. I was thinking as an option being to use an
> exciter board from Hamtronics...the crystal controlled one with the
> oven for part 90 compliance as a replacement for the stock micor
> exciter/tripler/low level amp. The receivers work fine in both of
> my units as do the power amps (100W). I do have a bad power supply
> in one unit tho (bad 9.5 voltage under a load) that will have to be
> replaced. These units will be used for GMRS usage so type
> acceptance is a must!
>
> Any thoughts or other recommendations?
>
> Thanks
> Bob, GMRS WPVV845, Amateur KG4WAD, LMRS WPXC892
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
