OLD TUBE REPEATERS !
I'm running a GE progress line all
tube repeater here at VE3WFM ! 147.090 +
It uses the 5894 PA and runs 50 watts
out.
It is IRLP node 2430 and you can see a picture of
it on the IRLP web site,
click on node 2430, then click on the
URL.
I wonder if anyone elso out there is still running
this type of equipment...?
It's easy to fix, you can see all of the parts, it
keeps the room warm....
and as VE3SY said......"Real repeaters glow in the
dark" :-))
73 John VE3AMZ Waterloo Ontario
----- Original Message -----
Sent: Thursday, November 18, 2004 11:02
PM
Subject: Re: [Repeater-Builder] Repeater
Coordination
sorry Kevin at the bottom was a URL.. But Im sure you saw
that..
I get Frustrated at times... and speak what was on my mind....
since I have no heat in my house..
the Brain is a bit Frozen.
lets talk
about OLD TUBE repeaters and how they can Be used during the winter to Heat a
house.. I sure Could use one of them now..Instead I have the old Broadcast
transmitters
cost too much to run ..
OK on the topic of
repeaters.... anyone know where to get MRF901's I have an old
GLB
preamp preselector thats not working... it can only be the MRF
thats bad....
I didnt get a chance to Check RF parts Yet... and what
receiver would you recommend replacing a Hamtronics receiver with.... the
choices are Maggorie,Kendcom,,,spectrum
.
Kevin
Custer wrote:
May I remind everyone that this list (Repeater-Builder) is NOT for the
discussion of coordination.
Thanks...
Kevin Custer
Neal Newman wrote:
As repeater owners... we all know what its like for a new Coordination
Body to take over and screw things up.. well here we go again in the
tri-state area with metrocor.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
