Hi Jeff,
Swap the old duplexer back in and see
(hear actually) if the AM Station problem
goes away.
If the problem goes away with a duplexer
change, the physical construction of the
duplexer probe might be an issue. Some
bpbr duplexer probes are not DC grounded.
One thought would be to follow the receiver
output with a single band-pass cavity,
which has grounded (for dc) loops (probes).
cheers,
skipp
www.radiowrench.com/sonic
> "W2JRT - Jeff" <[EMAIL PROTECTED]> wrote:
>
> I have a 70cm repeater that is located about
> .75 mile from a commercial radio station.
>
> I was using a Cellwave Notch type mobile duplexer
> and experienced no problems what so ever. Recently
> I purchased a new Sinclair Bp/Br Q318GR, 4
> cavity duplexer and replaced the Cellwave. This
> morning I have noticed that the nearby radio station
> is now coming through on the repeaters transmitted
> signal.
>
> Anyone have an idea what causes this and how
> to get rid of it?
>
> Thanks,
> Jeff
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/