I have a couple of new N connectors for it if you need um / Dave / NĜATH ----- Original Message ----- From: "Gerald Pelnar" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Sunday, November 28, 2004 11:40 PM Subject: Re: [Repeater-Builder] Coax Question
> > I got several 25 foot pieces of 3/8" heliax I wanted to cut up and use for > jumpers. What are my chances of getting a PL259 soldered on to it? I guess > I > could have tried it before I posted, but someone might save me the > trouble. > > Gerald > > ----- Original Message ----- > From: "Mathew Quaife" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Sunday, November 28, 2004 11:43 > Subject: Re: [Repeater-Builder] Coax Question > > >> >> Look on ebay, there is a guy selling 1/4" hardline for very cheap. Also >> a >> PL259 will solder right on it. To get the ground soldered, don't worry >> about the wholes in the middel of the connector, but rather solder at the >> end of connector to the outer conductor. >> >> Mathew >> > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/