I have some GE Mastr III 860 amps, which I am selling, which are
rated at 110w on 26-28vdc.. +10dbm drive. They make 100 or better on
927.9875 and below. Most do 110w. Size is comparable to a Mastr II station
PA. Asking what I consider to be quite reasonable.... The Maxtrac Exciter
is +20dbm at the pin coax....
email me at [EMAIL PROTECTED] for more info...
Doug
KB8GVQ
At 12:44 PM 12/3/2004, you wrote:
>Wouldn't that be Yo! Yo! Yo! <G>
>
>Anyhow back on the topic of repeaters......
>I lurk quite a bit here and over on the AR902 group and I am in the
>process of gathering the pieces
>and parts to put up a 900Mhz amateur repeater. I am trying to locate a
>relatively inexpensive
>900 Mhz continous duty amp to be driven by a Maxtrac exciter as well as a
>source for a duplexer.
>
>I already have the maxtracs for use and the filters. I just need to do
>the VCO mods , replace the filters,
>and build my interface between the units. I have access to heliax and a
>900mhz commercial repeater antenna
>for use...maybe even two.
>
>Any recommendations on where to find the amp and duplexer on a budget ?
>
>73,
>Jon
>KD5SFA
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
