But does the weather radio ever shut up? Would the COS ever switch?
Put a time-out-timer on it ... after 10 minutes of electronically generated voice (similar to the Radio Shaft slogan) have it automatically turn off. Neil Mathew Quaife wrote: > > COS for the Weather radio or for the repeater. The COS is high > for the repeater, is there one for the WX200 as well? > > Mathew > > > > > Check you cos active high & low settings. > > > > Oregon Repeater Linking Group > > Mike Mullarkey > > [EMAIL PROTECTED] > > www.orlg.org > > > > > > > > -----Original Message----- > > From: w9mwq [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, December 07, 2004 7:06 AM > > To: [email protected] > > Subject: [Repeater-Builder] Cat1000B and Wx-200 Controller Help > > > > > > > > I have a Cat1000B that I hooked up the WX200 to, when I apply power > > to the WX200, after a few seconds the transmitter keys up and the > > Weather is then sent out the transmitter. The repeater is working > > fine until I do that. I did disable all the Zone 7 inputs as was > > mentioned in the WX200 but that made no difference. Any ideas. > > > > > > Mathew > > W9MWQ > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
