Ah, cool!
Thinking again .. I like that - so will you ;) Neil Mathew Quaife wrote: > > It will after the 3 minute timer kicks out the repeater. The radio > should only come on in the event of a Weather Alert or if it is > turned on by a key stroke. > > Mathew > > > > > But does the weather radio ever shut up? Would the COS ever > > switch? > > > > Put a time-out-timer on it ... after 10 minutes of electronically > > generated voice (similar to the Radio Shaft slogan) have it > > automatically turn off. > > > > Neil > > > > > > Mathew Quaife wrote: > > > > > > COS for the Weather radio or for the repeater. The COS is high > > > for the repeater, is there one for the WX200 as well? > > > > > > Mathew > > > > > > > > > > > Check you cos active high & low settings. > > > > > > > > Oregon Repeater Linking Group > > > > Mike Mullarkey > > > > [EMAIL PROTECTED] > > > > www.orlg.org > > > > > > > > > > > > > > > > -----Original Message----- > > > > From: w9mwq [mailto:[EMAIL PROTECTED] > > > > Sent: Tuesday, December 07, 2004 7:06 AM > > > > To: [email protected] > > > > Subject: [Repeater-Builder] Cat1000B and Wx-200 Controller Help > > > > > > > > > > > > > > > > I have a Cat1000B that I hooked up the WX200 to, when I apply power > > > > to the WX200, after a few seconds the transmitter keys up and the > > > > Weather is then sent out the transmitter. The repeater is working > > > > fine until I do that. I did disable all the Zone 7 inputs as was > > > > mentioned in the WX200 but that made no difference. Any ideas. > > > > > > > > > > > > Mathew > > > > W9MWQ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
