What about Bomar Crystals? They will manufacture crysals for $10.00 as to where everyone else charges from $15.00 to $20.00. Has anyone used them before and how are there xtals.
Mathew ----- Original Message ----- From: "Neil McKie" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, December 18, 2004 2:50 PM Subject: Re: [Repeater-Builder] Mitrek > > > One of the reasons I always go to > International Crystal Manufacturing Co, Inc. in Oklahoma City, > Oklahoma. http://www.icmfg.com 800-HAM-XTAL (800-426-9825) > > Hope this helps, > > Neil - WA6KLA > > Chuck Kelsey wrote: > > > > With all due respect, if the crystal manufacturer cannot make a > > crystal for a Mitrek with just the channel element part number, > > I'd seriously be looking for a different supplier. > > > > Chuck > > WB2EDV > > > > ----- Original Message ----- > > From: "krmvsjr" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Saturday, December 18, 2004 6:01 AM > > Subject: [Repeater-Builder] Mitrek > > > > > > > > > > > > > > Can anyone tell me details of crystal specifications for UHF mitrek. > > > I am getting a T44JJA390DK and would like to replace the crystals for > > > local frequencies. I would like to get confirmation that the > > > crystals are 3rd overtone crystals - series resonant - 32pf capacity - > > > (freq =10.7 / 9 for RX) I do not know the freq multiplication for TX > > > crystal. There is a local crystal manufacturer who can supply > > > xrystals if the operating parameters are specified. Can anywho has a > > > the service manual make me a copy ? Venkat VU2KV > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
