Any idea where a good point would be to get the audio from on the Mastr receiver would be. I do have the schematic so if you could just give me a reference point that would be very helpful.
Mathew > > Mat: The de-emphasis network on M-Pro receivers is after the Volume Control. > Since you are getting your audio feed from Volume Control High, you will > need to provide a de-emphasis some where in your interconnect/controller to > get rid of the tinny sound. > Fred > W5VAY > > ----- Original Message ----- > From: "Mathew Quaife" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Tuesday, December 21, 2004 5:13 PM > Subject: Re: [Repeater-Builder] Tin Sound Audio > > > > > > Took the audio from the HI side of the audio pot on the MASTR ER41 > receiver. > > > > Mathew > > > > > > > > > > > > At 11:00 PM 12/21/2004 -0000, you wrote: > > > >Is there a way to make the audio coming into the repeater a little > > > >more basey, like would adding say a 47 Ohm resister do it. Seems > > > >like certain users voices are very tinny sounding. Any thoughts. > > > > > > > > > <---Are you running deemphasis? Sounds like you're using a > > non-deemphasized > > > audio source from your receiver (aka discriminator audio) > > > > > > Ken > > > > -------------------------------------------------------------------------- > > ---- > > > President and CTO - Arcom Communications > > > Makers of state-of-the-art repeater controllers and accessories. > > > http://www.ah6le.net/arcom/index.html > > > We now offer complete Kenwood TKR repeater packages! > > > AH6LE/R - IRLP Node 3000 > > > http://www.irlp.net > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
