Here is a link to a document that shows the connection from the Pyramid SVR-200 mobile repeater to a Syntor X9000 radio. Maybe this will be of help as to where to find the COR signal in the X9000 radio.
http://65.40.200.240/x9000svr200.htm If you have any other questions, email me directly at [EMAIL PROTECTED] Thomas --- thecomputerdoctormn <[EMAIL PROTECTED]> wrote: > > > > Looking for a place to connect a controller to a > x9000. It would be > nice if it also was a source that was dependent upon > PL decode. But > a source for CSQ COS would be fine. If you know > both ways to do it, > please fill me in. Seems like there is very little > info on these > radios online. > > I went through Mike's site on the X9000, tons of > good info, just > none on using it as a repeater receiver or > transmitter. > > > > > > > > > > > > > > Yahoo! Groups Links > > > [EMAIL PROTECTED] > > > > > > __________________________________ Do you Yahoo!? Send a seasonal email greeting and help others. Do good. http://celebrity.mail.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
