Hi,
The upgrade is a CPU chip swap. All NHRC-4s are compatible: the NHRC-4,
NHRC-4/M2, NHRC-4/MVP. We are working on new manuals for the controllers,
with separate hardware/installation and software/operation manuals. (The
Software manual is done, we are working on the three different versions of
the hardware manual...) The manual change reflects that all NHRC-4s work
the same, but the three versions all install differently. I am very
hopeful that the new manuals will be ready very soon.
If you want the new firmware, tell Peter when you order...
Regards,
Jeff
At 01:06 PM 12/26/2004, you wrote:
>Jeff, Will the NHRC-4s currently in service be able to be upgraded? will
>the new firmware be made available? i.e., should I wait for the new
>version? I'm looking to purchase one in the next month or so.
>
>Also, our group has used the CSI-800 controller with good results. I'm not
>completely sure how it compares with others that have been mentioned. No
>bells and whistles but it has an autopatch and they are reliable.
>
>Paul
>
>
>----- Original Message -----
>
> >
> > Hi,
> >
> > Actually, with our Version 3.0 firmware coming out soon for the NHRC-4
> > (the longest beta test ever) the only controller we make that requires the
> > 16 button DTMF pad will be the NHRC-2. Everything else will only need the
> > 12-key DTMF pad, and there is free windows software available to program
> > the NHRC-10 with a PC.
> >
> > Jeff Otterson
> > NHRC LLC
> >
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
