You better grow your self one.
On Mon, 27 Dec 2004 15:10:59 -0500, Richard W. Solomon <[EMAIL PROTECTED]> wrote: > > I guess you guys weren't following the thread that closely. > Programming an NHRC-2 on a 902 repeater using a GTX. > Unless you know of a 902 HT with a 16 button pad ?? > > 73, Dick, W1KSZ > > -----Original Message----- > From: DCFluX [mailto:[EMAIL PROTECTED] > Sent: Monday, December 27, 2004 2:49 PM > To: [email protected] > Subject: Re: [Repeater-Builder] Re: Repeater Controllers > > Buy a new radio. What are you using? Sounds like a Motorola HT-220 > with a 12 digit keypad added on. > > On Mon, 27 Dec 2004 14:36:45 -0500, Richard W. Solomon > <[EMAIL PROTECTED]> wrote: > > > > Try programming DE W1KSZ/R in a NHRC-2. > > > > 73, Dick, W1KSZ > > > > -----Original Message----- > > From: Jim B. [mailto:[EMAIL PROTECTED] > > Sent: Monday, December 27, 2004 2:25 PM > > To: [email protected] > > Subject: Re: [Repeater-Builder] Re: Repeater Controllers > > > > Richard W. Solomon wrote: > > > I looked for one of those programs that works on a 486 Laptop, > > > but couldn't find one that works with what they jokingly refer > > > to as a sound card at Compaq back then. > > > But the Zetron only needs a 12 button pad. > > > Guess I'll wait for the new version from NHRC. > > > > > > 73, Dick, W1KSZ > > > > What's the big deal about 12 vs. 16 button pads? I don't know of any ham > > controllers that REQUIRE using the fourth column! > > -- > > Jim Barbour > > WD8CHL > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links > > > > > > > > > > > > Yahoo! Groups Links > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
