What does ease of programming have to do with how often a controller resets itself?
A simple interface should have nothing to do with the stability of a controler, or any firmware-based device, for that matter. 73, Chris, KG0BP ----- Original Message ----- From: "Mike Mullarkey" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, December 25, 2004 1:03 PM Subject: RE: [Repeater-Builder] Repeater Controllers > > I have tried most of the controller on the market and you may find a unit to > program easer than another but you are forgetting one important thing. When > that easy controller decides to give you a problem and lock up or reset by > it self or even reset when the timeout timer gets used. Then all your > programming is all messed up. You get to take a drive to the hill or in a > lot of cases take a snow cat trip to the hill. $$$$$$$$$ > > Oregon Repeater Linking Group > Mike Mullarkey > [EMAIL PROTECTED] > www.orlg.org > > > > -----Original Message----- > From: Mathew Quaife [mailto:[EMAIL PROTECTED] > Sent: Saturday, December 25, 2004 10:35 AM > To: [email protected] > Subject: Re: [Repeater-Builder] Repeater Controllers > > > I just went from an RLC2 controller to a CAT1000B controller and is much > easier to program. There is a windows software that you can purchase for > the controller, makes setting it up much easier. I had the RLC3 and found > that one to be very easy to work with, easier than the RLC2 is now. But > remember, each controller is going to have limits and will need to be > programmed. Even with the Cat, I had to ask for some advise and help > getting it set up. Hope this helps. > > Mathew > > > > > > > > Our club has owned a Link Club Controller for several years. It has > > worked great but is a big pain in the !@@ to program. We recently > > traded some things foir a Link RLC-4 controller but here we go > > again, it is just different enough that you need to stop and read > > the manual (very time consuming)! > > What controllers do others use? Is there a controller that has > > windows based software to program it? The Club has Windows software > > but it takes hours to load and download the info! > > What do you use and how easy is it to program? > > Bill for AARO > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
