Eric Lemmon wrote:
> Joe,
>
> I certainly agree that all makers SHOULD do this, but the Kenwood TK-350
> portables used by my local police department mix the tones in with the
> mike audio, upstream of the limiter. I've had to tweak the deviation on
> every radio I test. I guess Kenwood just wasn't thinking, during the
> TK-350 design phase...
>
> 73, Eric Lemmon WB6FLY
The last shop I worked for supplied 50-60 or more TK350's to a local mfg
plant, using MII's and later TKR-820's, with one RCA 1000 rptr for a
while. There was never any problem like you're describing.
But looking at my book, you're right. Tone is applied to pin 6 of IC207,
which is the mic limiter.
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
