Say Neil;
XYL would have a fit If I did that ! and I still have
whatever in the Attic
M. H.
----- Original Message -----
From: "Neil McKie" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, January 03, 2005 6:25 PM
Subject: Re: [Repeater-Builder] Re: [Motorola] MSR2000 PA Transistors
>
>
> People have been wondering why I seem to 'collect' all those old
> used Motorola and GE radios. I usually 'collect' them at swapmeets
> when the sellers can't give them away (except to me.)
>
> I finally unloaded almost all of the tube gear except one - even
> donated a GE MT-16 to a friend in the San Francisco Bay area
> sometime back.
>
> Why not? The manufacturers quit supporting them years ago.
>
> I have Motorola back to the later Motracs, Mocom-70's, Micors and
> Mitreks.
>
> I have RCA to Series 700.
>
> I have GE in Mastr-Pro (very nice radio) Exec II and Mastr II.
>
> Those here who have seen my garage will ... groan ...
>
> Get down to your local ham swapmeet and start catching up. Of
> course, you'll raise the price to me ... but the parts will be used
> by someone and not hit the scrap yard.
>
> Neil - WA6KLA
>
>
> skipp025 wrote:
>>
>> Do what most of us are doing, buy used Motorola
>> radios of the same era/type and lift the transistors
>> from surplus radios.
>>
>> I purchased 40 used mitrek 110 watt radios for
>> replacement UHF MSR PA Modules. Although the
>> remove and replace process takes some 3 plus
>> hours of serious work, the much lower cost
>> offsets the financial pain.
>>
>> The same would apply with with the VHF pa, which
>> also depends on whick of the 3 or 4 known VHF
>> PA versions you have.
>>
>> Ebay and the surplus radio dealers are good part
>> sources.
>>
>> cheers,
>> skipp
>> skipp025 at yahoo.com
>> www.radiowrench.com/sonic
>>
>> > > Anyone know where I can find MSR2000 finals?
>> > > I have a high band VHF MSR2000 with 2 blown
>> > > finals (one set), and would like to replace
>> > > all 4 if I can find a set of replacement transistors....
>>
>>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
