|
Looks that you have an old repeater, the new ones have that
pin called TOR
wich is what you want, if this is the case there is a small
square island in the
controller board near the IC11 ( pin 9 ), this change state
when there is a
valid "PL" received, maybe you will need a buffer for what you
need. hope this helps.
Juan
----- Original Message -----
Sent: Monday, January 10, 2005 6:27
PM
Subject: [Repeater-Builder] TKR820
(tkr-720) COR logic (pin 13)informationwanted.
Hello there,
Anyone have information to
configure the COR output
logic on the Kenwood TKR820 Repeater to ctcss
only?
I'd like to make pin 13 (COR) of the accessory
connector change
states with a valid received ctcss
tone.
As received, accessory
pin 13 (COR) changes state
with carrier squelch activity. This tidbit of
knowledge
seems to be a rather elusive animal. Maybe one of you
has
done this already?
Thanks in advance for your
reply.
cheers,
skipp
skipp025 at yahoo.com
Yahoo! Groups
Links
<*> To visit your group on the web, go
to:
http://groups.yahoo.com/group/Repeater-Builder/
<*>
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*>
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
|
