Mathew Quaife wrote:
> Well I have not done any testing at this point as it was brought to my
> attention just last night. I'm heading to work in a bit, but will be able
> to check it out tomorrow. I do have a spectrum analyzer, still learning to
> use it, but with help could figure it out. I will check a few things in the
> morning and see what I come up with and get back with everyone.
>
> Thanks.
>
> Mathew
>
>>>I had something brought to my attention yesterday on my 2 meter
>>>repeater. ABout 15 miles away, I'm being told that my repeater can
>>>be heard on the output for about 20 to 25 Khz away. From what I am
>>>told, it is not legitable, but it's there. The transmitter is a
>>>Majorrie Hi-Pro running about 2.5 watts and the PA is a Vocom 200
>>>Watts. I'm getting right about 165 watts out of the duplexer, fed
>>>through 7/8" hardline 160' to the top of the tower into a Diamond
>>>Dual Band Antenna with a vsr of 1.1 with 1/10 of watt reflected. Is
>>>this normal, or is there a problem.
You REALLY need to look at it with a deviation SCOPE. Any GOOD service
monitor will have one (ie, not Ramsey).
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/