Do you have any means to scan paperwork? If so, could I get you to scan any paperwork that came with the 224 and 228?
If you look at <http://www.repeater-builder.com/rbtip/ant-sys-index.html> and scroll down to the DB antennas section you will see that all we have is the DB201 and the DB420. Mike WA6ILQ At 06:37 PM 1/19/05, you wrote: >I just finished putting up a new dB228 and two new DB224 antennas the >spacing between elements was inconsistent from element to element on all of >the antennas. The shortest distance was 62 inches and the longest was 71 >inches as installed by the factory. Some of the other measurements were >70.5, 69, 63.5, 68, 67.5, 64.5, and 68.5 inches. So take your pick. These >have the 37 inch elements on the 22 ft mast. > > Also, I found all of the nuts loose that attach the harness to the elements >so be sure and torque them down before you put it up. > >John Lock KF0M >Wichita KS > kf0m at arrl dot net > > > -----Original Message----- > > From: w9mwq [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, January 19, 2005 3:04 PM > > To: [email protected] > > Subject: [Repeater-Builder] DB224 Spacing > > > > > > > > > > Anyone have the spacing information on the DB224 antenna with the > > new phasing harness? I just got on in from Cook towers today, > > elements are the right length, now just for the spacing information. > > > > Thanks. > > > > Mathew > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
