yes that is what he is saying ----- Original Message ----- From: "Mathew Quaife" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, February 01, 2005 2:33 PM Subject: RE: [Repeater-Builder] Sinple COS Circuit
> > Your saying the packet connector in the TM-V7? > > Mathew > > > -----Original Message----- > From: Ken Arck [mailto:[EMAIL PROTECTED] > Sent: Tuesday, February 01, 2005 11:30 AM > To: [email protected] > Subject: RE: [Repeater-Builder] Sinple COS Circuit > > > At 11:14 AM 2/1/2005 -0800, you wrote: > > > >Actually they are Kenwood TM-7V mobile radios, I tapped the Discriminator > >Audio, but need a circuit to key up the voter card, which will be a LDG > >RVS-8, which is tied into a Cat-1000B Controller. > > <---Pin 6 of the packet connector is COS. Active high = +5v. Actually, > every connection to the radio you need (PTT, COS, Disc and xmt audio) are > all available via the packet connector. > > HTH > > Ken > -------------------------------------------------------------------------- -- > -- > President and CTO - Arcom Communications > Makers of state-of-the-art repeater controllers and accessories. > http://www.ah6le.net/arcom/index.html > We now offer complete Kenwood TKR repeater packages! > AH6LE/R - IRLP Node 3000 > http://www.irlp.net > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
