Take a look at the packet jack, there is a COR already there. Mike Mathew Quaife wrote:
> Actually they are Kenwood TM-7V mobile radios, I tapped the Discriminator > Audio, but need a circuit to key up the voter card, which will be a LDG > RVS-8, which is tied into a Cat-1000B Controller. > > Mathew > > > -----Original Message----- > From: Neil McKie [mailto:[EMAIL PROTECTED] > Sent: Tuesday, February 01, 2005 11:07 AM > To: [email protected] > Subject: Re: [Repeater-Builder] Sinple COS Circuit > > > > As usual, depends on the receiver you are planning to use. > > GE, Motorola, RCA, Midland, Genave, others ... ??? > > Make / model will help a lot ... > > Neil > > w9mwq wrote: > >>WHat is the easiest way to obtain a COS circuit. Actually what I >>need is on the remote receiever units, it will require a seperate >>COS circuit. I could use tone boards, but thought there might be an >>easier way to accomplish the task. Any ideas? >> >>Mathew >> > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
