Re: [Repeater-Builder] Homebrew a 2M/440 crossband coupler?

[James]

And they have lots of duplex noise, even on 440 :)   I changed all the cabling on mine to RG 393 (142, 214 would work too).  Duplex noise gone after that! James Ken Arck wrote: At 03:13 PM 2/1/2005 -0000, you wrote: Does anyone have, or know where I can get plans to homebrew a 144/440 MHz crossband coupler (aka "diplexer") ?? I would like to find something with wideband characteristics (ie, low pass, high pass) such as some of the diamond or comet models, but needs to be able to handle 100 watts FM continuously from each band, without excessive loss and without duplex noise, or little capacitors smoking. Any suggestions, other than the Telewave models that cost over $300? <---Comet and Diamond make several models that will work just fine. And they're definately cheaper! Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html We now offer complete Kenwood TKR repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.