Greetings all,
I've recently joined up with our club repeater guru and I'm trying to
get smart.
We need to set a temporary PL for some troubleshooting efforts (we
have a mixing problem which causes the repeater to kerchunk itself
continously when the transmitter output mixes with some other (as yet
unknown) signals. Can somebody step me through this? The book only
mentions PL back in the remote-base section, which confuzes me a bit.
At any rate, we want to set the PL to 82.5 Hz, and it MUST NOT be
retransmitted (or our troubleshooting efforts will be moot).
To make things more interesting, the last time our repeater guru went
to the site, he could not send or receive data between the controller
and his laptop. (He was able to log in, but could not send/receive
data.)
Any thoughts? The last repeater I worked oin was only slightly more
complicated then two native-americans sending smoke signals back and
forth.
Thanks,
Mike
WM4B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
