I
need to get my old manuals out. GE made a 19" panel just for an auxilliary
receiver that had an audio amplifier, line out audio amp, and COR circuit all
built in. This way you could bet line out, -10dbm 600 Ohm audio ready to
go into a voter (long as you don't need 1950 VT) or aux rec site. I will
see if I can find the PN for the panel.
VC hi
is wideband disc audio, and will not mix with de-emphasized audio from satellite
receivers that are de-emphasized and conveyed via link radios. Also, if
you have an old pro station p/s, it might also have a remote shelf, and cards
for line out audio.
Also,
you could take speaker audio, and a fixed vol control setting, and put a dummy
load in place of the speaker, and pad down the audio to feed into the
voter/comparitor.
ssb
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
