Hi, I received these today, and they are way too big! They just slide right over the threads. The diameter of the threaded rod is smaller than 1/2". I measured with my dial calipers and the diameter is more like 0.370".
Steve WA6ZFT On Wednesday 16 February 2005 07:50, Jack Davis wrote: > 94830A550 > Cadmium-Plated Stl Hex Thin Flex-Top Locknut 1/2"-20 > Screw Size, 3/4" Width, 21/64" Height > In stock at $10.91 per Pack > This item is only sold in Packs of 10 > > Packs of 10 > > > > http://www.mcmaster.com/ > > > Here you go! > > Jack > K6YC > > ----- Original Message ----- > From: "mch" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, February 16, 2005 1:17 AM > Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking > nuts? > > > Well, this will give you the specs on it. It subs to another number, and > > that other part is NLA, but the description is still there. > > _______________________________________________ > > Item number. 0210397A06 * The item 0210397A06 has been replaced > > with 0210348A05. Selecting this > > item will add 0210348A05 to your cart. > > 0210348A05: Item has been cancelled > > > > NUTLCK 1/2-20X5/16 HEX STL CAD > > Unit of Measure: 3 PK > > _______________________________________________ > > > > Joe M. > > > > Mike Morris WA6ILQ wrote: > >> At 12:59 PM 2/15/05, you wrote: > >> >I have a Motorola T1504 duplexer in need of 4 locking nuts. The locking > >> >nut part number is 2-10397A06, but a call to Motorola parts indicates > >> >the > >> >part number isn't on file. Does anyone have any recommendations for a > >> >substitute part, and do they know what the nut size and thread pitch > >> > are for the locking nut? > >> > > >> >Steve > >> >WA6ZFT > >> > >> As I understand from a friend they've been NLA for a few years. > >> > >> I need 6 or so and am almost ready to call in a > >> favor and have a friend make some on a lathe, > >> starting with hex stock. > >> > >> Mike > >> > >> > >> Yahoo! Groups Links > > > > Yahoo! Groups Links > > Yahoo! Groups Links > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
