All I have is the 221 board and the board that it connects to, all in 
the factory metal box. It has connecters for the GE Phoenix SX 
radio. There is a place where another board could connect to and 
the side holders for that board. Would that be the 510N board slides 
in at? Or is the 510N board what the 221 connects to? There are no 
buttons to push and no switches to switch. It almost sounds like I 
only have half the unit.

Rod




Hello Rod:

I am looking at the 221 Series Tone remote control panel pc board manual 
and it
matches what you describe, K1 left front, LED on the left rear DS1.
this is the 2175 decoder card.  BTW this 221 series was available in
three models.

You need the Model 510N tone remote control console (like a teleset with 
  intercom, mon, f1 and f2 buttons on it depending what model remote you 
have connected.  I presume you have this unit.

If you wish, I can xerox a copy of the Model 221 Series tone remote 
control panels, and send it to you. It is the 098-0218 Instruction 
manual.  Please email me your address direct.

Ciao, Tony







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to